How To Connect Wireless Camera To Laptop

In this article, in that location are 5 means you can connect your Security IP Camera to your estimator. And nosotros volition cover the steps on how you should do information technology without a router, without internet, without a DVR/NVR or without its receiver. The following tabular array summarizes the of import information about connecting IP photographic camera to your computer for your reference.

Camera types:	POE camera or WiFi camera
Os(operation organisation):	Windows or Mac
Cable:	2-in-1 or 3-in-1 cable attached from the camera
Remotely access past:	Camera's UID

Note: Beginning you should install the security photographic camera in the right place. You can refer to How to Install Home Security Cameras Successfully.

5 Methods to Connect Your Security IP Camera to PC/Mac：

To brand it easier for you to find the right solution, you lot tin click and leap direct to the section you lot want.

For example, if your photographic camera is a PoE camera, then you can choose option 3 or 4.

one. Connect Direct to PC/Mac (without Internet)
2. Connect via Router (with Internet)
3. PoE (Wired) Camera without Injector/Switch
4. PoE (Wired) Camera with Injector/Switch
v. Connect a CCTV Camera Arrangement to PC/Mac

Of import Note: The methods recommended beneath may Not apply for the battery-powered security cameras, which require initial setup on your phones.

Connect a WiFi or PoE Camera Direct to PC/Mac (without Internet)

Hither'due south how to connect your security IP camera directly to a PC/Mac without an NVR or DVR, without a router network, without WiFi, and without any costs or complicated configurations.

you need to prepare the camera's ability adapter and a network cable.

1. Go your security photographic camera charged.

Utilise the power adapter to go the camera plugged-in and charged. Normally, when you buy a WiFi IP camera, it comes with a power adapter. For a PoE camera, ask the supplier and purchase one that'south workable for the camera.

2. Use the network cable to connect to the camera and the computer.

Normally there would exist a 2-in-one or three-in-1 cable attached from the camera. Find the network connector from that cable and use the network cable to connect to it. Then connect the other end of the network cable to the estimator. If your computer has a network already, disable it – make sure your reckoner is offline. Connect IP Camera Directly to PC

3. Browse and observe out the security camera'south IP address on the computer.

At present the security camera is connecting to your reckoner basically and physically. Only you still can't view the camera on the computer. What you need to exercise now is to scan and discover out the photographic camera's IP address. There should exist surveillance software from the aforementioned supplier with the camera. Take our test as an example. We take Reolink Customer on the computer. Launch it and it will automatically scan all the cameras in the same local LAN and show the default IP address (every camera has a default and unique IP address when information technology leaves the manufactory). Easy peasy! Camera IP Address

four. Change the computer's IP address to the same network prefix of the IP camera.

And then in Stride 3, y'all get your security camera'due south default IP address. In our exam, the default IP address of the photographic camera we use is 192.168.177.100, and now you need to change your computer's IP address to 192.168.177.ten, where x identifies the node/host and is the number betwixt 2 and 254. Then let's say the estimator's IP address is 192.168.177.12.

IP address 101: An IP address consists of 2 parts – one belongs to the network address and one belongs to the node address. All nodes on a given network share the same network prefix but have a unique host number.

Now to change the reckoner's IP accost (we take Windows 10 as an case):

1) Press the Windows + R keyboard shortcut to bring out the Run box.

two) Enter "ncpa.cpl" and open the "Network Connections" window.

Computer Run Box

iii) Right-click your computer' network adapter and select "Properties".

Network Adapter Properties

4) Select your reckoner'southward Cyberspace Protocol Version and click "Properties".

Internet Protocol Properties

v) Select "Use the following IP accost" and change the IP accost into 192.168.177.12.

Change Computer IP Address

And done. Now your IP photographic camera is connecting straight and communicating with your PC, because they are at present in the same little LAN. You can sentry your IP photographic camera with Reolink Client on your computer.

Of import: Since in that location is no router network, the IP camera would not transmit data or send alarms to your telephone. Still, you tin can record and save all the footage onto your estimator.

If yous're gonna apply your IP photographic camera with the computer all the time similar this (without router network), y'all'd better change the default status of your IP photographic camera's IP address to the static to keep it the aforementioned all the fourth dimension, because each fourth dimension yous reboot the IP camera, its IP address will be inverse and you will need to do all the steps above over again. To keep the IP camera'due south IP accost the aforementioned all the time, head to "Device Settings" and "Network General" on the Client (Reolink Client in our test), and choose "Static" for "Network Access". And done. Static IP Address for Camera

Connect a Wireless/WiFi Camera to Computer via Router (with Internet)

If you do accept WiFi network and need to remotely see the IP photographic camera when y'all're non in that location, you can connect your wireless or WiFi photographic camera to computer wirelessly via your router. Please note that you lot need to have, at least, a power adapter for the camera, a network cable, and a router.

1. Become your WiFi security camera charged.

Employ the power adapter to become the camera plugged-in and charged.

2. Employ the network cablevision to connect to the camera and the router.

A WiF camera needs to connect to the router with a network cable for initial setup, because the new photographic camera itself wouldn't recognize and auto-pick upwardly a network that information technology never uses. But after the correct WiFi settings can you disconnect the cable from the photographic camera and the router. And yeah once more, unremarkably there would be a 2-in-1 or iii-in-1 cable fastened from the WiFi camera. Notice the network connector from that cablevision and use the network cable to connect to information technology. And then connect the other end of the network cable to the router. Connect WiFi Camera to PC

3. Sentry the IP photographic camera on PC/Mac

On the computer, launch the surveillance software to add the camera and watch live view directly. In our test, nosotros open Reolink Client. Since the figurer and the camera are in the same network (using the same router network), Reolink Customer automatically searches and displays the camera directly. Click "Start" and you lot tin can view the camera on PC. And you tin can set up the configurations for all the functions you want the camera to have.

four. Fix WiFi settings and remove the network cable.

Do remember to brand the WiFi settings for the camera. On the software, navigate to "Device Settings" and "Network". Choose the WiFi network and enter the password, and done. Cameras from the different brands would have different WiFi settings. Delight refer to the guides y'all get from your supplier. After that, remove the network cablevision, and then the security IP CCTV camera connects to the computer wirelessly.

Important: If you lot need to run across the IP photographic camera from another reckoner that is not in the same network, y'all need to input the photographic camera's UID into the software to remotely access the camera.

Connect a PoE (Wired) IP Photographic camera to Computer without PoE Injector/Switch

Connecting a PoE wired IP camera to a computer via the router is similar to that of a WiFi photographic camera, and even much easier – you don't need to utilize a ability adapter, set the WiFi and remove the network cable. And you need at least i network cablevision, and a router with PoE adequacy to complete the setup.

1. Apply the network cablevision to connect to the photographic camera and the router.

PoE (Power over Ethernet) means y'all can just use a single network cable for both video and power manual. So just connect the camera to the router via the network cablevision, and the camera will get power supply and network access. Cloud Storage Please brand sure your router has the PoE feature. If not, effort the adjacent method.

2. Lookout man the IP camera on the computer.

On the figurer, launch the surveillance software to add the camera and sentry live view straight. In our test, we open Reolink Client. Since the figurer and the camera are in the same network, Reolink Client automatically searches and displays the camera direct. Click "Start" and you can view the camera on PC. And yous can set up the configurations for all the functions y'all want the camera to have.

Of import: If you need to see the IP photographic camera from another computer that is not in the same network, you lot need to input the camera's UID into the software to remotely admission the camera.

Connect a PoE (Wired) IP Camera to Estimator with PoE Injector/Switch

If your router does non support PoE, you need a PoE injector or PoE switch to help connect your IP camera to PC.In order to complete the setup y'all need at to the lowest degree a network cablevision, a router, and a PoE injector or PoE switch. Since the steps on how to connect a PoE IP camera to PC via PoE Injector/switch are quite the same to that of connecting without a PoE Injector/switch, nosotros'd similar to brand it more simpler to understand hither.

ane.connect the security photographic camera, router and PoE injector

Connect all the devices every bit the picture showed below, make sure your wireless IP camera is continued to a ability supply. PoE Camera Connecting to PC

2. Open Reolink Client & add the photographic camera direct

You lot tin can now open Reolink Client on your calculator, add the camera and watch live view directly. If you need to run across the IP camera from another calculator that is non in the same network, you demand to input the camera'southward UID into the software to remotely access the camera.

Of import: One time you connect the PoE IP camera to the PoE injector or switch which is connected to a router via Ethernet cables, yous've successfully continued the camera to the network. For a wireless IP photographic camera, you lot need to use a network cable to connect information technology to the router if you haven't set up the WiFi network configuration. And then the wireless IP camera is in the network. Y'all tin ready upward the WiFi configuration afterwards to brand the wireless IP camera connect wirelessly.

Connect a CCTV Photographic camera Organization to PC/Mac (with or without Network)

If you are using a CCTV camera arrangement, like the Reolink PoE kit RLK8-410B4, instead of single security camera, you may demand the following tutorial. A CCTV camera system ofttimes have their ain proprietary networks, and can piece of work with and without your router network.

one. How to connect a CCTV security camera system to a estimator without router network

Connect all the cameras to the NVR:When y'all receive the new IP camera system you lot bought, connect all the devices you got – connect the NVR to your reckoner's monitor and the mouse, employ the power adapters to charge the NVR and cameras, etc. For a WiFi system, once the WiFi NVR and the WiFi cameras are charged, they continued to each other automatically and would kickoff to communicate. For a PoE system, connect the PoE cameras to the NVR via the network cables provided.
Start watching the IP cameras:The startup and setup wizard will pop up to guide you to watch your cameras and do other configurations.

Now you lot can see all the IP cameras on your monitor and start recording.

2. How to connect a CCTV security camera system to a figurer with router network

Practise the step 1 shown above again.
Connect the NVR to your router via the network cable provided.
Start watching the IP cameras.

The startup and setup sorcerer will pop up to guide you to picket your cameras and exercise other configurations. If you need to encounter the IP cameras from another computer that is not in the same network, you need to input the NVR'south UID into the software to remotely admission the cameras.

Inforgraphic:

The infographic below also covers our 5 methods to connect IP security camera to PC/Mac . Hope this can exist helpful to you.

How to Connect Security Camera to PC

3rd-Political party Software to Connect IP Camera to PC/Mac

Y'all can also opt for tertiary-party software to connect and fix a security camera on the computer. Make sure the software tin can handle all the cameras on the network and support all the features for the cameras. Normally, the third-party software has several versions. And if y'all want to use full features of the camera, y'all demand to pay for a premium version. If your security IP camera is not working properly every bit expected or if you lot get whatever issues, you can try the tiptop 10 solutions to set IP cameras not working.

For whatever questions, delight don't hesitate to leave it in your comment. I will reply as soon as possible.

Source: https://m.reolink.com/connect-security-ip-camera-to-pc/

Posted by: shawpuble1956.blogspot.com